Repair and Anti-Skid

Stair Nosing

Made from orthophthalic resin and superior quality durable aluminium oxide grit. Standard colour yellow (RAL numbers made to order).

DDA: Compliant with the Disability Discrimination Act Nov 2004. Provides a permanently contrasting material on both the tread and downstand

Typical Applications:

• Existing slippery stairs/steps/ladder rungs
• Chequerplate
• Wood
• Concrete
• Stone.

Stair Treads

Made from orthophthalic resin and superior quality durable aluminium oxide grit. Standard colours: black, yellow or grey (RAL numbers made to order).

Definitions:

• Nosing: 25-150mm
• Stair Tread: 151-350mm
• Prices include downstand of between 15-50mm

Typical Applications:

• Re-covering existing slippery stairs/steps
• Chequerplate
• Wood
• Concrete
• Stone.

Anti-Skid Flat Sheet

Made from orthophthalic resin % superior quality durable aluminium oxide grit. Standard colours black, yellow or grey (RAL numbers made to order) Standard sheet (nominal 3.5mm thickness) uncut size 3000x1250mm. Low Profile sheet (nominal 1.0mm thickness) uncut size 3000x1220mm
Typical Applications

• Ramps, Platforms, Walkways, Bridges

Cleats

• 600 x 1.0

Q/Deck Anti-Skid

Heavy duty, solvent free floor coating 

• Impervious and non dusting.
• High Flexibility.
• Waterproof.
• Fully resistant to hot water and steam cleaning.
• Anti–skid, incorporating coarse or fine grade aggregates.
• Weatherproof - NB: Q/DECK is not light resistant. Some colour reduction may occur in outside environments

Click here to view colour chart

Convertect PC - Anti-Skid

2-pack resin floor coating.

• Excellent Coverage
• 2 pack epoxy product (eliminates the possibilities of soft spots etc).
• High Flash Point – enabling usage where other inflammable products should not be used.
• It is extremely durable and shows a wide degree of resistance to oils. grease and wide range of chemicals

Click here to view colour chart

Floor Repair

Floor repair is modified polyurethane concrete which has been specifically designed to provide an easy-to-use, primer free compound with exceptional physical properties.

Click here to view colour chart

• Floor Repair exhibits exceptional resistance to impact and abrasion.
• The cure time is not affected by reduced temperatures in the same manner as epoxies and it is therefore ideal for the average building site repair.
• Floor Repair, although exceptionally tough and hard wearing, has been designed to be slightly flexible to absorb shock.
• Floor Repair has the same consistency as a cement based mortar and can easily be placed and trowelled to a closed finish.

Speedscreed HD Floor Repair

• Heavy duty high build floor for dairy and parlour floors, yards, factory floors, cold stores & damaged concrete.
• Easy to use just add water
• Can be used on damp surfaces
• A.D.A.S approved
• 3 hour Cure
• Material allowing quick turnaround at low cost

Q/Pol Floor Repair

• Renovate and Protect Silage Floors
• Multi-purpose Sealer
• Add screening mix to treble durability of concrete.
• Multi-purpose product used from a sealer to a heavy screeding mix.
• May be mixed in any ratio, although the more water that is replaced the stronger it will become. The type of mix will be determined by the substrate roughness.

Q/Seal Repair

• Seal your concrete walls and floors
• Treble the abrasion resistance of concrete
• Transparent Brown Colour
• Resistant to silage effluent
• Protect your silage pits, slurry tanks, garages, warehouses, chemical stores against erosion.

Q/Flex Repair

• Single pack urethane joint sealant
• High flexibility and resistance to ageing
• Ideal for panel joints in silage pits and effluent tanks
• Available In Black or Grey